Table of Contents
Advertisement
Technical specifications
7.2 Directives and declarations
The following figure indicates the maximum electrostatic charge anyone is subjected to when
coming into contact with the materials shown. These values correspond with specifications to
IEC 801-2.
①
②
③
Protective measures against electrostatic discharge
NOTICE
Observe grounding measures
When working with electrostatic sensitive devices, make sure that the person, the
workplace and the packaging are properly grounded. This helps to avoid electrostatic
charging.
As a rule, only touch the ESD if this is unavoidable, for example for maintenance. When you
touch modules, make sure that you do not touch the pins on the modules or the PCB tracks.
In this way, the discharged energy cannot reach and damage the sensitive devices.
Discharge electrostatic electricity from your body if you are performing measurements on an
ESD. Do so by touching grounded metallic parts.
Always use grounded measuring instruments.
74
Synthetic materials
Wool
Antistatic materials such as wood or concrete
Operating Instructions, 04/2015, A5E35883103-AB
Mobile Client900WXN
Advertisement
Table of Contents
