Table of Contents
Advertisement
Parameter assignment of a Mobile Client
4.8 "Admin" page
5. Click "Set password".
The overview page opens. The "Apply Config & Reboot" button flashes.
6. Click "Apply Config & Reboot". The device restarts and activates the new password.
You must log on as administrator with the new password for all functions to be available.
Deleting a password
The password is reset if you leave both password fields blank when you change the
password. All functions are available without logon after restart with "Apply Config &
Reboot".
Log on and log off as administrator
When the user is not logged on as administrator (logged off), only the following functions are
available:
● Admin
● Calibration
● Q-Data
● Upgrade
1. To log on as administrator, press "Admin". The following page opens:
2. Enter the password. If the password is correct, the overview page of the "Maintenance"
website opens and all functions are available (see section "Maintenance website").
3. To log off, press "Logout" at the top right.
The user is no longer logged on as administrator (logged off).
54
Operating Instructions, 04/2015, A5E35883103-AB
Mobile Client900WXN
Advertisement
Table of Contents
