Table of Contents
Advertisement
Safety Protection
When the Safety protection switch on the front of the machine is set to ON, the machine stops if something is
detected entering the movable range of the print-head carriage.
This function prevents contact with the print-head carriage, which moves at high speed during printing. To
guarantee safety, be sure to turn safety protection on when using the machine.
When all the following conditions are met, safety protection stops the machine.
• The power cord is connected.
• The main power (①) is on.
• The sub power (②) is on.
• The Safety protection switch (③) is set to ON.
• The auto switch (④) is set to the on position.
(The print-head carriage is not positioned above the maintenance station.)
• Something enters the detection areas of the proximity sensors (⑤).
To release a safety protection
When safety protection is active, the Anti-collision/emergency stop activation window is displayed on the Print
Exp screen.
If the safety protection activates during printing, select the check box and click [Resume printing] or [Cancel
Print].
Safety Information
7
Advertisement
Table of Contents
