Decontamination Declaration
Any device returned to Siemens for repair must be accompanied by a Declaration of
Decontamination. With this declaration you certify
have been carefully cleaned and are free from any residues
If the device has been operated together with toxic, caustic, flammable or water-
damaging products, clean the device before return by rinsing or neutralizing. Ensure that
all cavities are free from dangerous substances. Then, double-check the device to ensure
the cleaning is completed.
Siemens will not service a device or spare part unless the declaration of decontamination
confirms proper decontamination of the device or spare part.
Shipments received without a declaration of decontamination will be cleaned
professionally at your expense before further processing.
Decontamination Declaration form can be found on the internet at
www.siemens.com/processinstrumentation, under Service – Decontamination
Declaration.
A5E33329501
SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
that the returned products/spare parts
.
Page 229