Remote Operation; Operation Via Simatic Pdm 6 (Hart); Features And Functions; Startup And Configuration - Siemens SITRANS LUT400 Series Operating Instructions Manual

Remote operation

SITRANS LUT400 supports several software tools for operation via remote communications:
• PC running SIMATIC PDM
• PC running Emerson AMS Device Manager
• PC running a web browser
• PC running a Field Device Tool (FDT)
• Field Communicator 375/475 (FC375/FC475).
This section of the manual covers basic information required to use these tools with your
SITRANS LUT400. Further details for each are available in the Communications for SITRANS
LUT400 (HART) Manual (7ML19985NE01). (See DVD shipped with device or download
manual from product page of our website: Go to www.siemens.com/sitransLUT400 >
Technical Info > Manuals/Operating instructions.)
Italian, Portuguese and Russian are not supported in the software tools for
Note:
remote operation. If the device is set to one of these languages, it may be necessary to
switch the device to English, German, French, Spanish or Chinese.

Operation via SIMATIC PDM 6 (HART)

(SITRANS LUT400 compatible with PDM version 6.1)

Features and Functions

SIMATIC PDM is a software package used to commission and maintain SITRANS LUT400 and
other process devices. PDM monitors the process values, alarms and status signals of the
device. It allows you to display, compare, adjust, verify, and simulate process device data; also
to set schedules for calibration and maintenance. Please consult the LUT400 online help for
details on using SIMATIC PDM. (You can find more information at:
www.siemens.com/simatic-pdm.)
SIMATIC PDM features four Quick Start Wizards (Level, Volume, Volume-Linearization, and
Flow) to easily configure the SITRANS LUT400. A Pump Control Wizard is also available. Other
features include Echo Profile Utilities, Manual TVT Shaper adjustment, Auto False Echo
Suppression screening, Process Variables monitoring, and Maintenance scheduling.
Parameters are identified by name and organized into function groups. The menu
structure for SIMATIC PDM is almost identical to that of the LCD. See
Structure
on page 277 for a chart. For a complete list of parameters, see
reference (LUI)
on page 137.

Startup and Configuration

To startup the SITRANS LUT400 using SIMATIC PDM, check that you have the latest version of
PDM installed (update your installation if necessary - see
install the EDD. Next, configure the device using the Quick Start Wizards in PDM.
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
LCD Menu
Parameter
SIMATIC PDM version
below), then
Page 127