Table of Contents
Advertisement
5
Sending a fax
Entering Fax mode
To enter fax mode, press
the key will glow green.
Faxing from the ADF
a
Make sure you are in Fax mode
b
Put the document face down in the ADF.
c
Dial the fax number.
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If the memory is full, the fax will be sent in
real time.
Color fax transmission
Your machine can send a color fax to
machines that support this feature.
However, color faxes cannot be stored in the
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progress
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
28
Broadcasting
5
(Black & White only)
(Fax), and
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One-Touch, Speed-Dial numbers, and up to
5
50 manually dialed numbers in the same
broadcast.
.
After the broadcast is finished, a Broadcast
Report will be printed.
a
b
c
d
e
5
• If you did not use up any of the numbers
• The available memory will vary depending
5
• If the memory is full, press Stop/Exit to
Make sure you are in Fax mode
Load your document.
Enter a number. Press OK.
You can use either a One-Touch, a
Speed-Dial, a Group, or a manually
entered number.
Repeat c until you have entered all the
fax numbers you wish to broadcast to.
Press Black Start.
Note
for Groups, you can 'broadcast' faxes to
as many as 160 different numbers.
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.
5
5
.
Advertisement
Table of Contents
