Table of Contents
Advertisement
Menu Setting Difficulty
Difficulty
The machine beeps when you try to
access the Setup Receive menu.
Copying Difficulty
Difficulty
Cannot make a copy
Vertical streaks appear in copies
Scanning Difficulty (MFC-3360C only)
Difficulty
Cannot scan
TWAIN/WIA errors appear while
scanning.
Software Difficulty
Difficulty
Cannot install software or print
'Device Busy'
94
Suggestions
If the Fax
key is not illuminated, press it to turn on Fax mode. The Setup
Receive setting is available only when the machine is in Fax mode.
Suggestions
Make sure that the Copy
mode on page 70.)
Make sure the panel cover is completely closed.
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner on page 105.)
Suggestions
Make sure the panel cover is completely closed.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
®
PaperPort
SE with OCR, click File, Scan and choose the Brother TWAIN/WIA
driver.
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the LCD.
key is illuminated. (See Entering Copy
Advertisement
Table of Contents
