Openflex™ Data24 Disassembly; Openflex Data24 Disassembly - Western Digital OpenFlex Data24 Manual

EcoDesign Disclosures
If a drive is encrypted (TCG or FIPS), unlock the drive before executing any
Note:
commands.
Note: In the following commands, replace the generic reference of
device reference appropriate for your operating system (i.e.
Windows).
NVMe
• NVMe - Crypto Erase - SSD:
# sudo nvme sanitize /dev/<nvme_namespace> -a 4
• NVMe - Block Erase - SSD:
# sudo nvme sanitize /dev/<nvme_namespace> -a 2
Important:
Express® NVM Command Set Specification
command-set-specifications/
1.4 OpenFlex™ Data24 Disassembly
This procedure provides instructions for disassembling an OpenFlex™ Data24.
Table 3: Replacement Procedure Info
• T7 Torx screwdriver
• T8 Torx screwdriver
• T10 Torx screwdriver
• Tweezers or needle-nose pliers
(recommended)
Step 1 : Power down the system by shutting down the system from the operating system.
Step 2 : (Optional)
servicing away from the system. This will allow for ease of access to the components on the
chosen side while keeping the system cabling organized and safe.
For more information related to NVMe Sanitize, see the current version of the NVM
.
Required Tools
If your configuration contains a CMA, carefully move the arm on the side in need of
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
<dev>
for Linux,
sgX
at https://nvmexpress.org/developers/nvme-
# of People Required
• 2 for removal of the Chassis from the rack
• 1 for the disassembly of the Chassis
sanitize
with the specific
for
SCSIX:X,X,X
4