Ecodesign Overview; Openflex Data24 Ecodesign Specifications; Secure Erasing A Storage Device - Western Digital OpenFlex Data24 EcoDesign Manual

EcoDesign Disclosures
1.1 EcoDesign Overview
This document provides information about the OpenFlex Data24 related to its manufacturing and operation,
and instructions for secure data deletion and disassembly.
1.2 OpenFlex Data24 EcoDesign Specifications
Manufacturer's Registered Trade Name
Manufacturer's Registered Trade Address
Starting Year of Manufacture
PSU efficiency at 20%, 50%, 100%
Power Factor at 50% Rated Load Level
Declared Operating Condition Class
Neodymium Content in HDDs
1.3 Secure Erasing a Storage Device
This task provides instructions for performing a Secure Erase on an OpenFlex Data24 storage device using
NVMe-CLI.
Before you begin: The Secure Erase feature provides the following options for securely erasing the storage
device:
• No Secure Erase – initializes the number of storage pools on the device
• User Data Secure Erase – deletes the mapping table and all user content present on the device
• Crypto Secure Erase – deletes the encryption key, making the data unrecoverable
This procedure assumes prior knowledge of the device names that will be deleted.
Step 1 : From a terminal, use NVMe-CLI to issue a
command modifier with a value set to 2 (crypto secure erase).
nvme format /dev/<device ID> --namespace-id=1 --ses=2
1. This value is the original date of product manufacture. For the specific manufacture date of your platform, check the
agency label attached to the platform. There will be a 4 digit date code on that label.
Product Type
Manufacturer's Name
Product Model Number
of rated output power
Cobalt Content in Batteries
1. EU EcoDesign Disclosures
Online Data Storage Product
Western Digital
Western Digital®
5601 Great Oaks Parkway
San Jose, CA 95119
USA
DCS0010
2020
20% load = 93.01%
50% load = 94.31%
100% load = 92.02%
Minimum Power Factor (at 50%) = 1.0
A2
N/A
N/A
command to the target drive. Use the
format

1.1 EcoDesign Overview

1
--ses
2