Out Of Memory Message; Manual Transmission; Sending A Fax At The End Of A Conversation - Brother 565 User Manual

Out of memory message

If you get an OUT OF MEMORY message while scanning the first page of a fax, press
Stop/Exit
to cancel the scan. If you get an OUT OF MEMORY message while
scanning a subsequent page, you will have the option to press
the pages scanned so far, or to press

Manual transmission

Manual transmission lets you hear the dialing, ringing and fax-receiving tones while
sending a fax.
1
Insert the original face down in the ADF.
2
Pick up the handset and listen for a dial tone.
—OR—
Hook
Press
3
Enter the fax number you want to call. (You can enter the digits using the dial
pad, or you can enter a One-Touch or Speed-Dial number, or you can call
Search/Speed Dial
using
(See Storing One-Touch Dial numbers on page 7-1.)
4
When you hear the fax tone,
Fax Start
press
5
If you're using the handset, hang up.

Sending a fax at the end of a conversation

At the end of a conversation you can send a fax to the other party before you both
hang up.
1
Ask the other party to wait for fax tones (beeps) and then press Start before
hanging up.
2
Insert the original face down in the ADF.
Fax Start
Press
The LCD shows:
3
Replace the handset.
6 - 3 SETUP SEND
and listen for a dial tone.
.)
.
.
Stop/Exit
to cancel the operation.
SEND
SEND
Fax Start
to send