Copy Options: Single Or Multiple Copies, Sort/Stack, Reduce/Enlarge - Brother 565 User Manual

Copy options: Single or Multiple copies, Sort/Stack,
Reduce/Enlarge
You can choose additional copy options. First, you can select the number of copies.
Next, you can choose whether multiple copies will be STACKED (all copies of page
1, then all copies of page 2, etc.) or SORTED (collated). Finally, you can choose an
enlargement or reduction ratio. To automatically reduce the copy to the paper size you
have set for the paper tray, select AUTO . To reduce the copy by a fixed percentage,
choose 93% , 87% , 75% or 50% . Or, to enlarge the copy, select 150% , 125% or 120% .
To copy a document at its original size, select 100% .
1
Insert the original face down in the ADF.
2
Copy/Reports
Press
3
Enter the number of copies you want (1-99).
To start copying now, press
Copy/Reports
If you would like to select additional copy options, like SORT , ELG/RDC
(Enlarge or Reduce) press
4
Press or
To start copying now without enlarging or reducing, press
Copy/Reports
To reduce or enlarge the image, press
Menu/Set
.
5
Press or
or reduction ratio.
6
Copy/Reports
Press
If you are making multiple copies and get a OUT OF MEMORY message while
you are scanning the first page, press
a single copy. If you selected SORT and the OUT OF MEMORY message
appears while scanning subsequent pages, you can press
copy the portion that is in memory, or press
the copy job using less memory, press
The default resolution for multiple copies or reducing and enlarging copies is
FINE . Set the resolution to S.FINE for small print or artwork and PHOTO for
photographs by using the
use up more memory than FINE mode.
.
.
Menu/Set
to select SORT or STACK .
.
to select an enlargement
.
Resolution
NO.OF COPIES:01
THEN COPY OR SET
.
ELG/RDC:100%?
SELECT
Stop/Exit
to cancel the job. Then make
Stop/Exit
to cancel. To restart
Copy/Reports
key. S.FINE and PHOTO resolutions
MAKING COPIES 10 - 2
↑ ↓
& SET
Copy/Reports
to
for stacked copies.