Advertisement
Quick Links
Advertisement
Related Manuals for EasyThreed NANO plus
Summary of Contents for EasyThreed NANO plus
- Page 1 NANO plus USERS MANUAL Please watch operation video in Website or YouTube Channel:Easythreed3D...
- Page 2 Thank you for purchasing NANO plus 3d Printer,NANO plus is kind of consumer 3d printer,it can make your custom creations come to life, Just plug in the printer, download the models, click print, and watch as you bring an object into the world through 3D printing For updated information, please visit www.easythreed.com...
- Page 3 (STL format 3D file need be sliced to gcode format that printer can recognize). (1).This 3d printer runs with it’s own developed slicing software named NANO plus , it is in the TF card included in the accessories box , please copy it to your computer and no need installation ,you can also download NANO plus from official website, and you can watch Slicer operation video in Youtube channel.
- Page 4 make the printing platform fall to the standard distance, (check the distance is right or not .that is, when drawing A4 sheet, the nozzle should be attached to the A4 sheet without scratching it). 2,3,4, c), do the same way to adjust another three points。...
- Page 5 to feed, when there is regular silk come out of the nozzle, feed succeed, Then you can press button to finish feed. Note: Make sure the distance between the nozzle and printing bed is 3cm at least . If no enough space, press the button hold for 3 seconds then release , Z axis will go up 1cm ( when the printer power on ,press...
-
Page 6: Maintenance
Do not leave the product running while unattended. ●Precaution None of components of the NANO plus 3d Printer or parts printed from it or using filaments are certified for food safety nor should they be regarded as food-safe therefore should not come in touch with the mouth or foods/liquids that will be ingested by humans or animals ●Maintenance:Long time use or improper use, nozzles, nozzle assemble parts, or other may need... - Page 7 A: slide the back gear to ‘retract’ gear, normally this way will retract successfully, if failed pls try to feed first, then retract again. Please Pay special attention that, gently pull up the material to help till filament completely get out of the printer head. Q4: What's the reason that the model can not stick to the printing bed in the initial, printing or in the process of printing? A: The gap between the bed and the nozzle too far, you need leveling the bed, use the method we...
- Page 8 A:Yes, it needs to use third party slicing software CURA. Please refer to the above step of point 5.0 Online printing(For experts) Thanks for choosing Easythreed, we will try our best to serve you ShenZhen Easythreed Technology CO.,LTD Address : No.A2 , 2nd Floor , Avant Low Carbon Innovation Park , No1034 of...