Apex Digital DIGI-STIM Instruction Manual page 22

English
Declaration – electromagnetic emissions and immunity –
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
The.ME.system.is.intended.for.use.in.the.electromagnetic.environment.specified.below..
The.customer.or.the.user.of.the.ME.system.should.assure.that.it.is.used.in.such.an.environment.
IEC. 60601. test.
Immunity.test
level
Conducted.RF 3.Vrms
IEC.61000-4-6 150.kHz.to.80.MHz
Radiated.RF 3.V/m
IEC.61000-4-3 80.MHz.to.1.GHz
The.ME.system.is.intended.for.use.in.the.electromagnetic.environment.specified.below.
The.customer.or.the.user.of.the.ME.system.should.assure.that.it.is.used.in.such.an.environment.
IEC. 60601. test.
Immunity.test
level
Electrostatic.dis-
±3.kV.contact
charge.(ESD)
±8.kV.air
IEC.61000-4-2
The ME declaration – electromagnetic immunity
Compliance.
level
3V
3V/m.
Declaration – electromagnetic immunity
Compliance.
level
±3.kV.contact
±8.kV.air
Electromagnetic.environment.-.guidance
Portable. and. mobile. RF. communications. equipment.
should.be.used.no.closer.to.any.part.of.the.EQUIPMENT.
or. SYSTEM. including. cables,. than. the. recommended.
separation. distance. calculated. from. the. equation. appli-
cable.to.the.frequency.of.the.transmitter.
Interference.may.occur.in.the.vicinity.of.
equipment.marked.with.the.following.symbol.
Electromagnetic.environment.-.guidance
Floors.should.be.wood,.concrete.or.ceramic.tile..If.floors.are.
covered.with.synthetic.material,.the.relative.humidity.should.
be.at.least.30.%.
20