YASKAWA Z1000 User's Manual Supplement page 15

4.3 The Drive, Programming, and Clock Adjustment Modes
3 Press the ENTER key to enter select the parameter setting mode.
4 Use the up and down arrow keys to scroll through display menu until parameter o4-17 appears.
5 Press the ENTER key until "0" flashes.
6 Press the up arrow key so that the display changes to "1".
Press the ENTER key and the time setting screen will appear. Use the right arrow key to select
7
the desired digit, then set the correct date and time using the up and down arrow keys.
After entering the correct time, press the ENTER key to save the changes.
8
The display will return to the display shown in step 5 and the alarm LED will be OFF.
n n o4–17: Real-Time Clock Setting Parameter
Z1000 No.
Software (Addr.
Version Hex)
PRG: 1012 o4-17
and less (3100)
PRG:
o4-17
1013 and
(3100)
greater
Setting 0: — —
No Setting (Default)
Setting 1: Set
When o4-17 is set to 1, the HOA keypad will show the Clock Adjustment display. In Clock Adjustment Mode the user can
adjust the Real-Time Clock.
Setting 2: Reset
When o4-17 is set to 2, the Real-Time Clock data is cleared. A TIM fault will occur until the Real-Time Clock is set by o4–
17=1.
110
YASKAWA TOEP YAISUP 04A YASKAWA AC Drive – Z1000 User Manual Supplement
Procedure
Name
Sets the current date and time for the Real-Time Clock.
Set/Reset Real-time Clock
0: Disabled
Set Time
1: Enabled
Sets the current date and time for the Real-Time Clock.
Set/Reset Real-time Clock 0: — — No Setting
Set Time
1: Real-Time Clock Set
2: Real-Time Clock Reset
7 Replace Section 4.3 beginning on page 106
Description
0: Disabled
1: Enabled
0: — —
1: Set
2: Reset
YASKAWA ELECTRIC TOEP C710616 45B YASKAWA AC Drive – Z1000 User Manual
Display
ALM ALM
- PRMSET - PRG
Initialization
A1-00 = 0
Select Language
FWD
ALM ALM
- PRMSET - PRG
Maintenance
o4-17 = 0
Set time
FWD
ALM ALM
- PRMSET - PRG
Set time
o4-17= 0 *0*
- -
"0"
FWD
ALM ALM
- PRMSET - PRG
Set time
o4-17= 1 *0*
Set
"0"
FWD
ALM ALM
YYYY/MM/DD HH:MM
20 1 0/01/01 00:00
Second per month
+ 0 sec
ALM
Entry accepted
Values
Default: 0
Range: 0~1
Default: 0
Range: 0~2
15