Setup (G115D Converters Only); Quick Setup - Siemens SINAMICS G120 Operating Instructions Manual

Standard Web pages

5.4 Quick setup

5.4.3

Setup (G115D converters only)

The setup Web page allows you to configure a comprehensive range of settings to meet the
specific requirements of the G115D converters. You can perform the following three setups:
• Quick setup (Page 56)
• Application setup (for G115D PROFINET and AS-i variants only) (Page 64)
• Safety setup (Page 67)
5.4.3.1 Quick setup
The quick setup Web page allows you to set the following data for the connected G115D
converter:
• Control mode
• Motor data
• I/O configuration
• Important parameters
• Motor identification
56
SINAMICS G120 Smart Access
Operating Instructions, 12/2020, A5E43332487-004