Bypass Valve Operations; Complete The Installation - Pentair WF6-P Manual

BYPASS VALVE OPERATIONS

In Service
In Service
Figure A shows the system "in service" which
allows water to flow in and out of the tank. In this
position the system would be considered ON.
Figure A
Figure A
In Bypass
In Bypass
Figure B shows the system "in bypass" which will
direct water straight to the home without going
in and out of the tank. In this position the system
would be considered OFF.
Figure B
Figure B

COMPLETE THE INSTALLATION

1. Turn on main water supply
2. Press Pressure Release Button on top of Injector Pump
3. Check for leaks
4. Peel off the protective plastic wrap from the stainless steel tank jacket(s)
5. Add the Pentair logo sticker(s) in the desired location on the tank
6. Wax stainless steel tank jacket(s) with wax provided (or any other non-abrasive auto wax) a minimum of 1-2 times per year or as
needed based on the installed environment
12 • IRON & MANGANESE FILTER SYSTEM COMBO