Tv Operation; Fm Modulator Operation - Boss Audio Systems BV2950TU User Manual

TV Operation

To watch TV, press the MODE button (on
the front panel or the remote) to enter TV
mode.
Setting up TV Channels
Press the MENU button on the remote to
enter the automatic channel search
mode. Press the
tuner will begin scanning for available
stations and store them in the tuner
memory. When the tuner has finished
scanning the TV band, press the
button.
Selecting a Viewing Channel
You can search either by using the
buttons to step up and down the TV
band, or use the numeric buttons on the
remote keypad to directly enter the one
or two digit channel number you wish to
view (Please note: To enter a two digit
channel, first press the GOTO button and
then press the two digit channel number).
Adjusting TV Volume Level
To adjust the volume level, press the
VOL+/- buttons on the remote control.
Muting the Audio
To temporarily silence the TV sound,
press the MUTE button on the remote.
Press it again to restore the prior volume
level.
button and the TV

FM Modulator Operation

Why use the built-in FM Modulator?
If the receiver you currently have in your
vehicle lacks audio inputs, the built-in FM
Modulator of the BV2950TU offers an
easy way to deliver the audio output from
the BV2950TU to your car's audio
system.
This powerful FM Modulator is designed
to input directly to your car radio in the
FM band between 87.7MHz and
88.9MHz. This portion of the radio band
(the left end of the spectrum) has fewer
stations present so is ideal for this
purpose.
and
Selecting an operating frequency
To select an FM operating frequency, put
the unit into DVD mode. Then press the
MENU button repeatedly to step through
and select an FM frequency between
87.7MHz and 88.9MHz.
Tune your vehicle radio to this same
frequency. If audio quality is good, set a
radio preset button to this frequency your
setup is complete!
If you experience interference or poor
reception, try one of the other available
frequencies. Be sure to change your
radio to the new frequency you just set,
and check the audio quality. Repeat this
process until you achieve the best
results.
BV2950TU User's Manual - page 17