Boss Audio Systems BV2950TU User Manual page 16

Press the SUB-T button (23) during
playback. The following information will
be shown on the screen.
Each time you press the button, the
subtitle cycles between the different
languages recorded on the disc.
Notes:
- Not all discs will allow changing the
subtitle during playback. In these cases,
select the subtitle from the DVD menu.
- There may be a delay before the
selected subtitle appears.
- For some discs, the subtitles will be
displayed even when this is set to off.
- The number of available languages
varies from disc to disc.
Switching the audio tracks
For VCD/SVCD discs which have
multiple audio tracks, you can change the
audio track temporarily during playback
Press the AUDIO
between the audio tracks recorded on the
disc.
Notes:
- Some discs only contain one
soundtrack language.
Multi-audio language function
For DVD discs which have multiple
language soundtracks, you can change
the language track temporarily during
playback.
Press the AUDIO
between the audio tracks recorded on the
disc.
:
:
Notes:
- The language number is different
according to the disc.
BV2950TU User's Manual - page 14
button (22) to switch
button (22) to switch
- Some discs only contain one
soundtrack language.
- Not all discs will allow changing the
subtitle during playback. In these cases,
select subtitle from the DVD's menu.
Multi-angle function
For DVD discs in which scenes have
been filmed from multiple angles, the
viewing angle can be switched during
playback.
Press ANGLE (25) during playback. The
following information will be shown on
the screen.
ANGLE 1
The angle setting cycles between the
available viewing angles recorded on the
disc each time the button is pressed.
Notes:
- The ANGLE function is only available
for discs which support it and programs in
have been recorded.
- Depending on the disc, the angle may
switch in one of two ways.
1. Seamless: The angle switches
smoothly.
2. Non-seamless: When the angle is
switched, a still picture is displayed first,
after which the angle switches.
- The angle number varies from disc to
disc.
Program play function
- In VCD/CD playback mode, press
PROG button (32) to activate the
program edit interface as follow: