Setting The Fax Activity Report Interval; Using The Reports Key - Brother MFC-4800 User Manual

Setting the Fax Activity Report Interval

You can set the machine to print activity reports at specific intervals (6, 12, 24
hours, 2, 4, or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the next page.
1
Press Menu/Set, 2, 4, 2.
2
Press to choose an interval,
or
and then press Menu/Set.
(If you choose 7 days, the LCD prompts you to choose a day at which to begin
the 7-day countdown.)
3
Enter the time to begin printing, in 24-hour format, and then press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.

Using the Reports Key

Five reports are available:
10 - 2
P R I N T I N G R E P O R T S
Prints the Menu Table so you can see at-a-
glance how to quickly program every menu
selection.
Lists names and numbers stored in Speed Dial
and One Touch Dial (FAX models only)
memory, in numerical order.
Lists information about the last 200 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission.
Lists settings for GENERAL
SETUP RECEIVE,
SETUP REPORTS, and
The settings for REMOTE FAX OPT
included.
SETUP,
SETUP SEND,
TEL SERVICE.
are