Checking Job Status; Canceling A Job While Scanning The Original; Canceling A Job In Memory - Brother MFC-4800 User Manual

3
To change the default setting, press
Menu/Set.
Go to Step 5—OR—For the next fax transmission only, press
NEXT FAX ONLY, and then press Menu/Set.
4
For the next fax only, press
Menu/Set.
5
Press 1 if you want to select additional settings. The LCD returns to the
menu—OR—Press 2 if you are finished choosing settings, and then go
SEND
to Step 6.
6
Enter fax number, and then press Fax Start.

Checking Job Status

Check which jobs are still waiting in memory to be sent. If no jobs are waiting,
the LCD shows
1
Press Menu/Set, 2, 6.
2
If you have multiple jobs waiting, press
3
Press Stop/Exit.

Canceling a Job While Scanning the Original

You can cancel a job while you are scanning it into memory by pressing
Stop/Exit. Eject the original by pressing Stop/Exit again.

Canceling a Job in Memory

You can cancel tasks you've scheduled, such as Polling Transmit or faxes
waiting in Memory to be sent. (See Checking Job Status above.)
1
Press Menu/Set, 2, 6.
Any waiting jobs appear on the LCD.
If no jobs are waiting, the LCD shows
NO JOB WAITING.
2
If you have more than two jobs waiting, press
cancel, and then press Menu/Set.
—OR—
If you have only one job waiting, go to Step 3.
3
Press 1 to cancel—OR—Press 2 to exit without canceling.
To cancel another job, return to Step 2.
4
Press Stop/Exit.
to select
or
NO JOB WAITING. (See Canceling a Job in Memory below.)
to select ON (or OFF), and then press
or
ON (or OFF), and then press
to scroll through the list.
or
to select the job you want to
or
S E T U P S E N D
to select
or
SETUP
6 - 4