Changing Remote Codes; To Change Remote Codes - Brother MFC-925 Owner's Manual

46
C H A P T E R F I V E

Changing Remote Codes

Remote Codes might not work with some telephone systems. The preset
5 1. The preset Deactivation Code is # 5 1.
Activation Code is
If you are always disconnected when accessing your external TAD
remotely, try changing the Activation Code from
Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number
for the Activation Code and the Deactivation Code.

To change Remote Codes

1
Press Menu, 2, 4.
Press Z or X to select ON (or OFF).
2
REMOTE ACT.:ON
3
Press Set when the screen displays the setting you want.
4
If you want to, enter a new Remote Activation Code, then press Set.
ACT.CODE:*51
5
If you want to, enter a new Remote Deactivation Code, then press
Set.
DEACT.CODE:#51
6 Press Stop to exit.
5 1 to # # # and the