Specifications - Johnson Controls GH-5000 Manual

130 4280 010 E

Specifications

Product
Media
Max. operating pressure
Permissible ambient
temperature
Valve sizes
Valve torsion group
Valve class
Pressure taps
Materials
Filter
Mounting position
Operating voltages
Power consumption
Compression fitting
Enclosure
Operating time rating
Duty cycles
Opening time
Closing time
Agency Listing
Specification Standards
The performance specifications are nominal and conform to acceptable industry standards. For application at
conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be
liable for damage resulting from misapplication or misuse of its products.
We reserve the right to make technical changes without warning.
Johnson Controls SA/NV - Leuvensesteenweg 248D - B-1800 Vilvoorde - +32(2) 709 40 00 - www.johnsoncontrols.be
Page:3
GH-5000 Electro-Hydraulic Actuator Valve
Gas families to DVGW-Arbeitsblatt G 260/I. 1., 2. and 3. Gas family.
Rp ¾ - 2 ½ & DN 40-65
Rp 3 & DN 80-100
DN 125
DN 150
-10 to +60°C (14 to 140°F)
Threaded connections Rp ¾, 1, 1 ½, 2, 2 ½, 3: ISO 7-1:1994
Flanges DN 40, 50, 65, 80, 100, 125, 150: ISO 7005 PN 16, DIN EN 1092-2
Group 2
A
Valve body:
:
Valve body
Seals, diaphragm:
Standard Strainer:
Limited horizontal and vertical
ATTENTION: See also Valve position label!
120 V +6% / -10%
230 V +6% / -10%
200 W on opening action
15 W in opened state
EN 50262
IP 54 (NEMA 1)
100% ED
-1
3 min (Rp ¾ - 1½, DN 40)
-1
2 min (Rp 2-3, DN 50-80)
-1
1 min (DN 100-150)
Rp ¾ - 1½, DN 40:
Rp 2-3, DN 50-80:
DN100-150:
< 1 s
EC-Type Approval
Pressure Equipment (97/23/EC)
Appliances burning gaseous fuels (90/396/EC): EN 161
Electromagnetic compatibility (89/336/EC)
Low voltage equipment (73/23/EC)
1000 mbar
800 mbar
650 mbar
350 mbar
Rp 1/4 (ISO 7-1:1994)
die-cast aluminium EN AC-43400 or
EN AC-47100, DIN EN 1706
(Rp ¾ to 2 and DN 40-50)
cast iron EN-GJS-400-15, DIN EN 1563
(Rp 2½ to 3 and DN 65-80 and
valves GH-57.. DN100-150)
cast iron EN-GJL-250, DIN EN 1561
(valves GH-54.. DN100-150)
NBR
1 mm (0.04 in). mesh (steel)
90° max. from
verticaln
50/60 Hz
50/60 Hz
< 6,5 s
< 8 s
< 13 s