Aiwa XR-EM70 Service Manual page 35

<FM Adjustment>
For adjusting FM, do wiring and connection as in the following.
Standard Signal Generator i
9. Tracking Adjustment (FM)
Requirement
Measuring device: Millivoltmeter
Test Point: Lch, Rch, GND
Adjustment Point: L901, L902, L904, L905
(1) Adjust the S.S.G setting to 108.0 MHz, 75 kHz variation and reduce the output level all the way.
(2) Adjust L901, L902, L904, L905 until the value of millivoltmeter reaches the maximum.
(3) Adjust the S.S.G setting to 98.0 MHz, 75 kHz variation, and 66 dBuV for the output level.
(4) Check that the test point voltage is below 13 dBuV.
10. Auto Stop Check (FM)
Requirement
(1) Adjust the S.S.G setting to 98.0 MHz, 75 kHz variation, and 40 dBuV for the output level.
(2) Activate the tuner search function, and check that there is reception of 98.0 MHz.
All manuals and user guides at all-guides.com
SET
Lch
Rch
GND
– 35 –
TP
Connect to the respective measuring device
AC MILLIVOLTMETER
CH2
CH1
Lch
GND
GND
Rch