Set Your Station Id - Brother MFC MFC-290C Quick Setup Manual

10

Set your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Menu.
b
Press 0.
c
Press 3.
d
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
e
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press Clear/Back.
Press One
key time
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
f
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.
10
Two Three Four
times times times
B C
E F
H I
K L
N O
Q R
U V
X Y
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.
2
3
4
5
6
S
8
Z