Chain - BMW F 800 GS Rider's Manual

Secure the data link
9
connector
Disconnect the diagnosis and
126
information system interface.
z
Seat diagnostic connector 2
into the bracket 3.
The locks 1 engage.
Install seat (

Chain

Lubricating chain
Insufficient cleaning and lu-
brication of the drive chain
Increased wear
Clean and lubricate the drive
chain regularly.
Lubricate drive chain at least
every 600 miles (1000 km). Af-
ter driving though water or dust
and dirt, carry out lubricate ear-
lier accordingly.
Switch off ignition and engage
Neutral.
50).
Clean drive chain with suitable
cleaning agent, dry and apply
chain lubricant.
Wipe off excess lubricant.
Check chain sag
Make sure ground is level and
firm and park motorcycle.
ATTENTION
Turn the rear wheel until the
position with the lowest chain
sag is reached.
Press chain upward and down-
ward using a screwdriver and
measure difference A.
Chain sag
1.4...1.8 in (35...45 mm) (Mo-
torcycle unloaded on side
stand)