BMW F 800 GS Rider's Manual page 112

ing on a firm and level support
9
surface.
110
Remove the screw 1 and take
z the pulse sensor out of the
bore hole.
Remove axle nut 2.
Loosen lock nuts 3 on left and
right by turning counterclock-
wise.
Loosen adjusting screws 4 on
left and right by turning clock-
wise.
Remove adjusting plate 5 and
slide axle as far as possible to-
ward inside.
Remove quick-release axle 6
and take out adjusting plate 7.
Roll rear wheel as far forward
as possible and remove
chain 8 from chain sprocket.
Roll rear wheel toward rear out
of swinging arm.
NOTICE
The chain sprocket and the
spacer sleeves on the left and
right are loosely inserted in the
wheel. Exercise care during the
removal, in order that the parts
are not damaged or lost.