Table of Contents
Advertisement
Chapter 5
Color fax transmission
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the memory.
When you send a color fax, the machine will
send it in real time (even if Real Time TX is
set to Off).
How to preview an outgoing
fax
You can preview a fax message before you
send it. You must set the Real Time
Transmission and Polling RX to Off before
you use this feature. (See Real time
transmission on page 46 and Polling receive
on page 92.)
a
Press
(Fax).
b
Press d or c to display Preview.
c
Press Preview.
d
Press On.
e
Load the document.
f
Enter the fax number using the dial pad.
You can also enter the fax number on
the LCD by pressing Phone Book and
Send a fax, or you can press a
One Touch key on the machine's control
panel. (For details, see How to Dial
on page 79.)
g
Press Black Start.
The machine starts scanning the
document and the outgoing fax appears
on the LCD.
When the fax is displayed, press MENU
and the following buttons will appear on
the LCD. Press the button you want to
use to perform an operation.
42
5
Button
Description
Enlarge the fax.
Reduce the fax.
Scroll vertically.
or
Scroll horizontally.
or
Rotate the fax clockwise.
Go back to the previous page.
d
Go to the next page.
c
5
Close the preview table.
Note
To send a color fax do not use Fax
Preview.
h
Press Black Start.
Note
The fax message in the memory will be
sent and then erased when you press
Black Start.
Canceling a fax in progress
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
5
Advertisement
Table of Contents
