Table of Contents
Advertisement
Chapter 2
l
Close the paper tray cover and slowly
push the paper tray into the machine.
Pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
If you are finished using Ledger, Legal or
A3 size paper and want to use a smaller
paper size, take the paper out of the tray.
Then shorten the tray by pressing the
universal guide release button (1).
Adjust the paper length guide (2) to fit the
paper size you are going to use. Then put
the smaller paper into the tray.
2
16
Loading envelopes and
post cards
About envelopes
Use envelopes that weigh from 20 to 25 lb
(80 to 95 g/m
Some envelopes need margin settings to
be set in the application. Make sure you
2
do a test print first before printing many
envelopes.
1
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
• That are of a baggy construction.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
1
Glue
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
2
).
IMPORTANT
Double flap
2
2
Advertisement
Table of Contents
