Table of Contents
Advertisement
Error Message
Unusable Device
Disconnect device
from front connect
or & turn machine
off & then on
Unusable Device
Please Disconnect
USB Device.
Wrong Paper Size
Cause
A broken device has been
connected to the USB direct
interface.
A USB device or USB Flash
memory drive that is not
supported has been connected to
the USB direct interface.
(For more information, visit us at
http://solutions.brother.com.)
Paper is not the correct size.
Troubleshooting and Routine Maintenance
Action
Unplug the device from the USB direct
interface, then press On/Off to turn the
machine off and then on again.
Unplug the device from the USB direct
interface.
1 Check that the machine's Paper Size
setting matches the size of paper in the
tray. (See Paper Size and Type
on page 28.)
2 Also, check that the machine is set to
use the tray with the paper size you
want. (See Tray use in Copy mode
on page 29 and Tray use in Fax mode
on page 29.)
3 Make sure you loaded the paper in a
Portrait position, as shown in the label
on the tray.
4 (Duplex copy) After you have checked
the above settings and the paper
position, press Black Start or
Color Start to continue printing.
B
161
Advertisement
Table of Contents
