Bissell CleanView 3003 Series User Manual page 9

Maintenance & Care
Clearing Clogs from the Dirt Tank
1. Unplug the vacuum from electrical outlet.
2. Remove the Dirt Tank from the vacuum,
following steps 1-3 of "Emptying the Dirt Tank"
on page 7.
3. Remove the Dirt Tank Filter Assembly from
the Dirt Tank, following step 2 of "Cleaning the
Dirt Tank Filter" on page 8.
4. Tap the Dirt Tank Filter Assembly over a
garbage container to remove any dirt or debris
from the cyclone screen that surrounds the Dirt
Tank filter.
5. Reach up into the Dirt Tank to clear any dirt
or debris from the tank.
6. Check to see if there are any clogs
in the suction inlet.
7. After clearing any dirt or debris from the Dirt
Tank, replace the Dirt Tank Filter Assembly back
into the Dirt Tank.
9
www.BISSELL.ca