Advertisement
11. Connect short orange wire from relay assembly to
indicator light assembly.
12. Connect short black/white wire from relay assembly
to indicator light.
13. Control panel assemblies vary due to available
control options. Find unused space on control
panel and install relay and indicator light
LIGHT ASSEMBLY
FIGURE 2
Install Relay and Indicator Light Assemblies
RELAY
FIGURE 3
Install Panel Switch Assembly
assemblies in control panel using self-drilling
screws provided (see Figure 2).
14. Install door panel switch into panel switch bracket
113-908 (see Figure 3). Door panel switch acts as
interlock safety device to disable UV light source
upon removal of blower access panel preventing UV
exposure.
FIND AVAILABLE MOUNTING
LOCATIONS IN THIS AREA
ROUTE WIRES THROUGH
BUSHING
DOOR PANEL
SWITCH ASSEMBLY
MIS-4313
MIS-4312
MIS-4312
BLOWER ASSEMBLY
SCREW
MIS-4313
Manual
7960-912
Page
5 of 8
Advertisement
