Installing The Programming Station Software - HEIDENHAIN TNC 320 Operating Instructions Manual

Installing the programming station software

Note that all files are overwritten during installation of an
update.
If you have created files or made any changes to files, make
backup copies of these before installation.
 Place the programming station CD in the CD-ROM drive
 The CD browser starts automatically if your CD-ROM drive has been
appropriately configured. If Autostart is not active, run the
<Start.exe> file
 Choose the language to be used for the CD navigation

Select <Install software>
 Select <Install TNC programming station> in order to start the
installation program
 Follow the installation program instructions
You can install this programming station version on your PC
together with another version (e.g. iTNC 530) already
installed on your PC. However, it is not possible to use the
applications simultaneously. If a programming station is
active, close it before starting another programming
station.
54