Number Stickers; Connecting The Usb Dongle (For The Version With A Virtual Keyboard); Connecting The Usb Network Dongle (Only For The Version With A Virtual Keyboard) - HEIDENHAIN TNC 320 Operating Instructions Manual

Number stickers

The self-adhesive number stickers included with the programming
station keyboard enable the user to recognize which manually pressed
soft key belongs to which soft key displayed on the PC's monitor.
You can apply the large sticker to the programming station keyboard
and the individual numbers to the PC screen.
Connecting the USB dongle (for the version with
a virtual keyboard)
Connect the USB dongle to an available USB port on your computer.
Then install the driver for the USB dongle from the programming
station CD.
The programming station software then detects the connected dongle
automatically.
Connecting the USB network dongle (only for
the version with a virtual keyboard)
Connect the USB network dongle to an available USB port on the
computer you want to use as a server.
Then install the driver for the USB network dongle from the
programming station CD.
The programming station software on the computer automatically
recognizes the connected dongle after the network driver has been
installed successfully. You must appropriately configure the
computers to which you want to give access to the network dongle
after installing the programming station software (see "Configuring the
programming station software for use with a USB network dongle" on
page 55).
HEIDENHAIN Programming Station TNC 320/TNC 620/TNC 640 53