Operation - Nortel M1250 Manual

Operation

The console is programmed to
operate in any of the following
modes:
— Standard Busy Lamp Field (SBLF)
— Enhanced Busy Lamp Field (EBLF)
— Supervisory
There are three keys associated
with the BLF/CGM, as shown in
the table below.
Key Normal (non-shift)
conf. 6/BLF Conference 6
Signal Source
Signal Destination
4
If you are accessing an option on
the BLF/CGM and a call comes in
to your console, the console
returns to its normal operation.
That is, call processing takes
precedence over the functions of
the BLF/CGM.
Mode
Shift
BLF
CGM
Mode
If you make a mistake while
operating the BLF/CGM, it does
not affect the normal operation of
the console.