Setting The Date And Time - Brother DCP-770W Quick Setup Manual

8

Setting the date and time

Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality. It also allows the machine to name files
created when using the Scan to Card feature.
1
Press Menu.
2
Press a or b to choose Initial Setup, and
then press OK.
3
Press a or b to choose Date&Time, and then
press OK.
4
Press a or b to enter the last two digits of the
year, and then press OK.
Date&Time
Year:20
07
MENU
(e.g. Enter 0 7 for 2007.)
5
Press a or b to enter the two digits for the
month, and then press OK.
Date&Time
Month:
03
MENU
(e.g. Enter 0 3 for March.)
6
Press a or b to enter the two digits for the day,
and then press OK.
Date&Time
Day:
01
MENU
(e.g. Enter 0 1 for the first day of the month.)
7
Press a or b to enter the two digits for the hour
in 24-hour format, and then press
Date&Time
Time:
15:00
MENU
(e.g. Enter 1 5 for 15:00)
Input & Press OK
Input & Press OK
Input & Press OK
to next.
Input & Press OK
Setting Up the Machine
8
Press a or b to enter the two digits for the
minutes, and then press OK.
Date&Time
Time:
15:25
MENU
(e.g. Enter 1 5, 2 5 for 15:25.)
Note
You can increase or decrease the number rapidly
by holding down a or b.
9
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.
To confirm the current date and time, print
out the User Settings report. (See Printing
Reports in Chapter 1 of the User's Guide.)
Now go to
Supplied CD-ROM 'MFL-Pro Suite' on the next
page to install the drivers.
Input & Press OK
11