Damaged Rf Feed Point Pin - Nokia 3806 Service Manual

Damaged RF feed point pin

The pin (spring clip) of the antenna must be properly connected to the PWB.
If the main antenna's RF feed point pin does not touch the PWB, the antenna gain degrades by more than
17 dB.
If the RF feed pin is broken or bent, replace the antenna-asm Module.
If the RF feed pin spring turns out damaged, replace the antenna-asm Module.
Figure 2: Back view of internal antennas
Page 5-6
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Antenna Description and Troubleshooting
RM-583
Issue 1