Nokia 3806 Service Manual page 6

RM-583
ESD protection
ESD protection
Nokia requires that product service points have sufficient ESD protection (against
static electricity) when servicing products.
Any product of which the covers are removed must be handled with ESD protection.
The SIM card can be replaced without ESD protection if the product is otherwise
ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resistors, too, can be
damaged by static electricity discharge.
All ESD sensitive parts must be packed in metallized protective bags during
shipping and handling outside any ESD Protected Area (EPA).
Every repair action involving opening the product or handling the product
components must be done under ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of an ESD
Protected Area.
For more information and local requirements about ESD protection and ESD
Protected Area, contact your local Nokia After Market Services representative.
vi Issue 1
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.