Nokia 3806 Service Manual page 71

RM-583
Service Software Instruction
2.1 Log Display
Log Display: Show calibration information.
2.2 Control Setting and information
Text information: Show test information.
Start button: Start tuning.
3. Program Setting
There are two files which need to be configured before using the tool:
3.1 Sysconfig.ini
3.1.1 [COM]
The section is to set com port number and its baud rate. If using RS232 Cable between PC and
DUT's UART1, see "Hardware Connection", then:
ComPort = 1 or 2;
Note: It is recommended to use UART1 to communicate with PC; if using USB cable between PC
Issue 1
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Page 3-43