Nokia RM-94 Rf Troubleshooting Instructions page 19

RM-94
6(b) - RF Troubleshooting
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the phone:
P = +23dBm @ 897.4 MHz
out
If this is not the case, go to the GMSK fault finding chart for the GSM900 transmitter.
EDGE
Set operating mode to local mode.
Select
Wait until the RF Controls window pops up.
Select
Issue 1 04/2005
Operation mode
RX/TX Channel
TX Power Level
TX Data Type
Edge
Testing
Band
Active unit
Operation mode
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
Nokia Customer Care
Burst
37
10
Random
Off
RF Controls
GSM 900
TX
Burst
19