Fault Finding Chart For Gsm900 Transmitter - Nokia RM-94 Rf Troubleshooting Instructions

Nokia Customer Care
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the phone:
P = +24.5 dBm @ 897.4 MHz
out
If this is not the case, go to the EDGE fault finding chart for GSM900 transmitter.

Fault finding chart for GSM900 transmitter

In the following, it is assumed that the TXP signal is used as trigger signal. For that, a TXP test
point is provided.
20
RX/TX Channel
TX Power Level
TX Data Type
Edge
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
6(b) - RF Troubleshooting
37
10
All1
On
RM-94
Issue 1 04/2005