Other Features; Activate Demonstration Mode; Set Alarm Timer; Set The Sleep Timer - Philips DCD3020 User Manual

All manuals and user guides at all-guides.com

10 Other features

Activate demonstration mode

You can see an overview of all features.
1
In the standby mode with clock display (if
set), press on the main unit to activate
the demonstration mode.
» A demonstration of major available
features starts.
To deactivate the demonstration mode:
1
Press on the main unit again.

Set alarm timer

This unit can be used as an alarm clock. You can
select DISC, FM, iPod/iPhone/iPad, or USB as
alarm source.
Note
‡
Ensure that you have set the clock correctly.
1
In standby mode, press and hold TIMER/
SLEEP until [SET TIMER] (set timer)
scrolls on the display.
2
Press a source key to select a source:
DISC, FM, iPod/iPhone/iPad, or USB.
3
Press TIMER/SLEEP WR FRQÀUP
» The hour digits are displayed and begin
to blink.
4
Press / repeatedly to set hour, and
then press TIMER/SLEEP again.
» The minute digits are displayed and
begin to blink.
5
Press / to set minute, and then press
TIMER/SLEEP WR FRQÀUP
6
Press VOL +/- to adjust volume, and then
press TIMER/SLEEP WR FRQÀUP
7
A clock icon appears on the display.
Activate/deactivate alarm timer
In standby mode, press TIMER/SLEEP
repeatedly.
» If timer is activated,
is displayed.
» If timer is deactivated,
disappears on the
display.
Tip
‡
Alarm timer is not available when the source is
set as "MP3 LINK" or "AUX-IN".
‡
If DISC/USB/iPod/iPhone/iPad source is
selected but no disc is placed or no USB/iPod/
iPhone/iPad connected, the system switches to
FM automatically.

Set the sleep timer

This apparatus can switch to standby mode
automatically after a set period.
1
When the apparatus is turned on, press
TIMER/SLEEP repeatedly to select a
preset period (in minutes).
» When sleep timer is activated,
displayed.
To deactivate sleep timer
1
Press TIMER/SLEEP repeatedly until
[TIMER OFF] is displayed.
» When sleep timer is deactivated,
displayed.
is
is
EN 27