Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips DCD3020 User Manual

All manuals and user guides at all-guides.com

7 Listen to radio

Tip
‡
Position the antenna as far as possible from
TV, VCR or other radiation source.
‡
For optimal reception, fully extend and adjust
the position of the antenna.

Tune to a radio station

1
Press FM.
2
Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
‡ To tune to a weak station, press
UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO
reception.
Program radio stations
automatically
Note
‡
You can program a maximum of 20 preset
radio stations.
In tuner mode, press and hold ANGLE/
PROG for 3 seconds to activate automatic
programming.
» [AUTO SCAN] (auto scan) is displayed
EULHÁ\
» All available stations are programmed in the
order of waveband reception strength.
» 7KH ÀUVW SURJUDPHG UDGLR VWDWLRQ LV
broadcast automatically.
Program radio stations
manually
Note
‡ You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press ANGLE/PROG to activate
programming.
3
Press / to allocate a number from 1
to 20 to this radio station, and then press
ANGLE/PROG WR FRQÀUP
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
Note
/
‡ To overwrite a programmed station, store
another station in its place.

Tune to a preset radio station

In the tuner mode, press
preset number.
‡ You can also press the numeric buttons
to select a preset number directly.
/ to select a
EN 23