Connecting The Camera To Your Computer Via The Cyber-Shot Station; Care And Maintenance - Sony Cyber-shot Station CSS-PC1 Operating Instructions Manual

Connecting the camera
to your computer via the
Cyber-shot Station
1
Connect the Cyber-shot Station to your
computer by the USB cable supplied with
the Cyber-shot Station.

Turn on your camera.
The USB connection between the camera and
your computer will be established. Then you
can transfer image data to your computer.
For further details, refer to the operating
instructions supplied with the camera.
When the Cyber-shot Station is communicating
with your computer using the USB cable, do
not remove the camera from the Cyber-shot
Station. Removing the camera may damage the
image data.
To cancel the USB connection
Disconnect the USB cable or turn off the computer.
– For further details, refer to the operating
instructions supplied with the camera.
USB cable
Care and maintenance
Clean the Cyber-shot Station with a soft cloth
slightly moistened with water, and wipe the surface
with a dry cloth. Do not use any type of solvent
such as thinner, alcohol or benzine as this may
damage the surface.
1-GB