Set Up - Sony Cyber-shot Station CSS-PC1 Operating Instructions Manual

Set up
Preparing the Cyber-shot Station
1
Set the MODEL SELECT switch.
See the table below and set the MODEL
SELECT switch to match with your camera.
MODEL SELECT
switch ( , )
DSC-W200, DSC-W90, DSC-W85,
DSC-W80
DSC-T100, DSC-T25, DSC-T20

Connect the AC Adaptor to the DC IN jack
of the Cyber-shot Station.
AC Power cord
(mains lead)
Cyber-shot
Station
DC plug
AC Adaptor
To a wall
outlet
(wall socket)
To use your Cyber-shot Station abroad
- Power sources
You can use the Cyber-shot Station and the AC
Adaptor (supplied) in any country or region where
the power supply is within 100 V to 240 V AC
50/60 Hz.
Use a commercially available AC plug adaptor,
if necessary, depending on the design of the wall
outlet (wall socket).
AC plug adaptor
(not supplied)
Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
11-GB