Install System In Rack; Complete Setup; Figure 4. Securing System To Rack - Intel SSR212MA Install Manual

Install System in Rack

8. Lift the storage system and align chassis with the mounted outer rails.
9. Insert the inner rails of the chassis into the mounted outer rails and push system
toward the rear of the rack.
10. Tighten the rear screws on both the right and left side of the chassis.
11. Withdraw the chassis until it reaches a hard stop (about 400 mm or 16 in).
12. Tighten the front screws on both the right and left side of the chassis and then return
the storage system to its fully home position.
13. Secure the storage system to the rack by tightening the captive fasteners on the front
of the rack handles (see letter "A" in the following figure).

Complete Setup

14. Re-connect all peripheral devices and the AC power cable(s). Power up the storage
system.
Rail Kit Install Guide: Intel® Storage System SSR212MA

Figure 4. Securing System to Rack

A
TP02029
5