Cassette
Selecting the TAPE programme source
Insert a cassette into the cassette
compartment.
The display indicates "TAPE 1" – or –
if a cassette is already loaded:
"
SO
URCE/
Repeatedly press the
button until
APF
í
"TAPE" appears in the display.
Attention with automatic aerials!
Your radio switches on automatically when
loading a cassette.
This causes also the aerial to be extended!
Changing the cassette side
t
s
Slightly press the
and
the same time. At the end of the tape, the cas-
sette side is changed automatically.
"TAPE 1" - upper cassette side
"TAPE 2" - bottom cassette side
Selecting the tape type
Selecting Cr
Press the
¡
button until the signal
M ONO/
sounds. The Cr mode is activated and the dis-
play indicates "Cr".
Deactivating Cr
¡
Press the
M ONO/
sounds.
Cassette play with and without
Dolby B NR
Activating Dolby B NR
Briefly press the
Dolby B NR is activated and the display indi-
cates "
".
Deactivating Dolby B NR
Briefly press the
Dolby B NR is deactivated and "
pears from the display.
Dolby noise reduction is manufactured under
buttons at
license from Dolby Laboratories Licensing
Corporation. DOLBY and the Double D symbol
are registered trademards of the Dolby
Laboratories Licensing Corporation.
button until the signal
¡
button:
M ONO/
¡
button:
M ONO/
" disap-
15
Fast forward and rewind
Fast forward
s
Press the
button untilit locks in place.
The display indicates "WIND".
Stopping fast forward
t
Press the
button halfway in.
At the end of the tape, fast forward is auto-
matically stopped and the radio switches to
cassette play.
Fast rewind
t
Press the
button until it locks in place.
The display indicates "WIND".
Stopping fast rewind
s
Press the
button halfway in.
At the beginning of the tape, fast rewind is
automatically stopped and the radio switches
to cassette play.
GB