Radio Operation - Blaupunkt Miami Beach CD148 Owner's Records

Cd receiver with codem ii-us tuner
Table of Contents

Advertisement

Bass, Treble, Balance and Fade
Press Mute/AUDIO for more than l/2 second to access Bass. Subsequent presses access Treble,
Balance and Fade modes.
Bass
Adjust from +7 to -7 at 2 dB/step using + to increase bass, - to decrease.
Treble
Adjust from +7 to -7 at 2 dB/step using + to increase treble, - to decrease.
Balance
Adjust balance from 9 (all the way left) using + to -9 (all the way right) using -.
Adjust fader from 9 (sound only from the front) using + to -9 (sound only from the rear) using -.
Fader
Loudness (LD)
Press LD to increase sound of low and high frequencies. LOUD icon appears. To cancel, press LD
again.

Radio Operation

Last Station Memory
Each FM bank and AM band has its own last station memo
that band or bank Irrespective of whether that frequency is s r
Selecting Bands
Press SRC as needed to access FMI, FM2, FM3/FMT, AM/AMT banks.
Seek Tuning
Press A or V to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity
requirements predetermined by sensitivity set through SENS/LD button.
Tuning Sensitivity (SENS)
Press SENS/LD for more that 2 seconds to switch between local (lo) and distant search sensitivity.
When "lo" is absent from the display, search sensitivity setting is distant.
Radio Reception Hints
When listening to weak or distant AM stations, adjusting the Treble to minimum (-7) will reduce
l
noise and improve sound..
In general, set SENS to distant tuning is in rural areas or or where stations tend to be weak and
l
distant, and to local tuning when in metropolitan areas or areas where stations tend to be strong
and local.
LO when in metropolitan areas or where stations tend to be strong and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with an incoming signal of at least 20 dBpV is received.
14
35 WtlTTS x 4 - HIGH POWER
which holds last-tuned frequency for
bred into a preset.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents