Switch Wi-Fi Networks Manually - Blackberry Curve 8350i User Manual

Blackberry curve 8350i: user guide
Hide thumbs Also See for Curve 8350i:
Table of Contents

Advertisement

User Guide
Server subject for certificate validation:
If necessary, type the server subject name your device should use to verify that it is connecting to the correct Wi-Fi network.
Server SAN for certificate validation:
If necessary, type the server SAN your device should use to verify that it is connecting to the correct Wi-Fi network.
IMSI:
If your SIM card has more than one IMSI, set the IMSI that you use to connect to the Wi-Fi network.
Change the order of Wi-Fi profiles
1.
In the device options, click Wi-Fi Connections.
2. Highlight a Wi-Fi® profile.
3. Press the Menu key.
4. Click Move.
5. Roll the trackball to the new location.
6. Click the trackball.

Switch Wi-Fi networks manually

By default, your BlackBerry® device switches to an appropriate Wi-Fi® network automatically when you move between Wi-Fi coverage
areas.
1.
In the device options, click Wi-Fi Connections.
2. Set the Wi-Fi Selection Mode field to Manual.
3. Click a Wi-Fi profile.
4. Press the Menu key.
5. Click Save.
To connect to the first available Wi-Fi network in your Wi-Fi profile list automatically, set the Wi-Fi Selection Mode field to Automatic.
Prevent your device from connecting to a Wi-Fi network
1.
In the device options, click Wi-Fi Connections.
2. Highlight a Wi-Fi® profile.
3. Press the Menu key.
4. Click Disable.
To allow your BlackBerry® device to connect to the Wi-Fi network again, press the Menu key. Click Enable.
Delete a Wi-Fi profile
1.
In the device options, click Wi-Fi Connections.
2. Highlight a Wi-Fi® profile.
3. Press the Menu key.
Wi-Fi connection settings
217

Advertisement

Table of Contents
loading

This manual is also suitable for:

Curve 8350i - liste mit bekannten problemen

Table of Contents