Select The Required Programme By Means Of Programme Selector Dial; Select The Desired Temperature (Button 2) - AEG LAVAMAT 74950A User Manual

10
Daily use
2. If required, pour fabric softener into the
compartment marked
used must not exceed the MAX mark in
the drawer).
Close the drawer gently.

Select the required programme by means of programme selector dial (1)

You can choose the right programme for any type of laundry following the descriptions on
the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme selector
determines the type of washing cycle (e.g. water level, drum movement, number of rinses)
and the washing temperature according to the type of laundry.
The pilot light of button 7 starts blinking and the display shows the duration of the selected
programme.
The selector dial can be turned either clockwise or anticlockwise. Position
programme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position
switch the machine off.
If you turn the programme selector dial to another programme when the machine is work-
ing, the yellow pilot light of button 7 will blink 3 times and the message Err is displayed
on the display to indicate a wrong selection. The machine will not perform the new selected
programme.

Select the desired TEMPERATURE (Button 2)

When selecting a programme, the appliance automatically proposes the default tempera-
ture provided for that programme.
Press this button repeatedly to increase or decrease the temperature, if you want your
laundry to be washed at a temperature different from the one proposed by the washing
machine.
The symbol of cold wash corresponds to - - (
For the maximum and the minimum available wash water temperature, see «Washing pro-
grammes».
(the amount
) .
to Reset
, to