Table of Contents
Advertisement
14
Use
First Use
Ensure that the electrical and water connections comply with the installation
instructions.
Remove the polystyrene block and any material from the drum.
Run a cotton cycle at 95°C, without any laundry in the machine, to remove any
manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent
into the dispenser drawer and start the machine.
Setting the language
When switching on the appliance for the first time, by turning the programme selector
dial, you must set the language in which you want the messagges in the display to
appear. When the appliance is switched on again all the messagges in the display will
appear in this language.
Important!
If the display is not showing any language, the appliance has already been
switched on once. In such case, if you would change the language setting, press
at the same time the buttons 2 and 3 for 6 seconds to activate the menu
language. By pressing the button 4 you can scroll all the available languages.
Press the button 5 twice to confirm your choice.
Setting the time
After having chosen the language you must set the time prior to the first wash
and when changing to and from daylight savings time.
The clock setting permits you to modify/set up the current time. It is important
to keep it updated as the current END Cycle Time depends on it.
With a short/single time pressure of the button 4, the time varies minute by
minute. With a continue pressure of the same buttons, the time varies 10
minutes by 10 minutes.
Press the button 5 to fix the current time.
Personalization
This appliance is provided of a SETTINGS menu that allows you to modify the
factory settings as you want.
When you switch on the machine, by turning the programme selector dial, press
the button 4 to activate the Options menu. By pressing again the same button
you can move through all the available options till when you locate the
Advertisement
Table of Contents
